Q. How to reset Epson Printer To Factory Setting?
brothersupport0509

Epson Printer Troubleshooting


How to reset Epson Printer To Factory Setting?

Resetting and configuring your Epson printer is an effective way to start from scratch and troubleshoot printer problems. This article walks you through the steps of the process to Epson printer Reset.

Reset the printer

  1. Please turn off the printer.

  2. Use a paper clip or the tip of a pen to press and hold the reset on the back of the printer:

  3. While holding down the reset button, turn on the printer. Press and hold the reset button.

  4. After 5 seconds, a warning will be printed out. Release the reset button.

  5. After about 5 more seconds, another sheet will print showing the printer’s factory reset IP address. Newer Epson models will default to a DHCP address.

Configuring the Printer

  1. On an iPad or computer connected to the Revel network, open Safari or a web browser.

  2. Enter the printer’s IP address and tap Go.

  3. The next page will direct you to enter the login credentials. Enter the following:

Username: epson

Password: your printer’s serial number*

If you receive an incorrect password error when using the serial number, try again with the username “epson” and password “epson”

  1. In the Configuration menu, navigate to TCP/IP.

  2. Configure the following settings on TCP/IP settings page:

Get IP Address: Manual
Set using Automatic Private IP Addressing (APIPA): Disable
Set using PING: Disable
IP address: desired IP of the printer (Revel’s standard address range for printers is 192.168.22.205 - 192.168.22.219)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.22.1
Socket Timeout Value: 300
6. Tap Submit.

  1. Reset or power cycle the printer.

epson printer reset
0

Answers

2

Views

23

May, 2022

Science and Technology
 0.7 q

Asked in Category

Science and Technology

Few years back, you may have imagined about robots dominating the world; a miniature helicopter capturing photos; or living in Mars. Imagination goes well with creation. We’re on our way. For hundreds of years, science has been doing studies and giving explanations to occurrences that go beyond the human imagination and understanding. Thus, theories are created.
For hundreds of years, technology has been doing a great job in industrialising the world. You step in the land of the first world countries and see for yourself how lifestyle has been advancing. Yet, theory is a theory until it’s proven; technology remains limited. You might wake up one day and see that sci-fi turns into reality. However, what happens next when the clock ticks to ‘Midnight’ and doomsday is for the universe?

  • 2 views overall.
  • Asked on